Flow Meter
Flow Meter
Overview and Applications
The flow tester is a precision equipment for performing leak and flow measurements. Although it has been designed to be easily integrated in
Emdep test boards for testing water tubes, it is suitable for any other application where flow or leak measurements are required. Some typical
defects that can be detected by this equipment are:
Leakage on tubes.
Obstruction on tubes.
Etc
* The Flow tester can detect defects such as pinched or leaky tubes.
Measurements and detection range
The images show measurements of the absolute flow drop in different kind of tubes tested at 1 bar. Tests have been performed with different internal diameter (mm) and different length (m) tubes.
The following images show the relative flow drop in different kind of tubes tested at 1 bar. The detection threshold represents the recommended minimum flow drop compared with non-defective tube. Tests have been performed with different internal diameter (mm) and different length (m) tubes.
Technical Specifications
Technical Specifications | ||
---|---|---|
Power Supply | Voltage AC current | 88 ~ 264VAC, 47 ~ 63Hz 0.8A/115VAC 0.55/230VAC |
Applicable fluid | Air input requirements
Pressure range | According to ISO8573.1-1 Up to 7 bar |
Flow test | Channels Test pressure Repeatability Flow range | Up to 3* 0.5 – 1 bar ±1 % 0-100 l/min |
Leak Test | Channels Test pressure Accuracy Test time | Up to 3* 0.1 – 1 bar ±0.025 bar (resolution 0.01 bar) Programmable |
Test Mode | Controlled by PC | Wintestem |
Connectivity | Interface | RS-232 |
Mechanical | Dimensions | 355x100x240 (WxHxD) |
Application Examples