Flow Meter

Components test

Flow Meter

Flow Meter

Components test

Flow Meter

Previous

Next

The flow tester is a precision equipment for performing leak and flow measurements. Although it has been designed to be easily integrated in Emdep test boards for testing water tubes, it is suitable for any other application where flow or leak measurements are required. Some typical defects that can be detected by this equipment are:

Leakage on tubes.
Obstruction on tubes.
Etc

* The Flow tester can detect defects such as pinched or leaky tubes.

The images show measurements of the absolute flow drop in different kind of tubes tested at 1 bar. Tests have been performed with different internal diameter (mm) and different length (m) tubes.

The following images show the relative flow drop in different kind of tubes tested at 1 bar. The detection threshold represents the recommended minimum flow drop compared with non-defective tube. Tests have been performed with different internal diameter (mm) and different length (m) tubes.

Technical Specifications
Power Supply	Voltage AC current	88 ~ 264VAC, 47 ~ 63Hz 0.8A/115VAC 0.55/230VAC
Applicable fluid	Air input requirements Pressure range	According to ISO8573.1-1 Up to 7 bar
Flow test	Channels Test pressure Repeatability Flow range	Up to 3* 0.5 – 1 bar ±1 % 0-100 l/min
Leak Test	Channels Test pressure Accuracy Test time	Up to 3* 0.1 – 1 bar ±0.025 bar (resolution 0.01 bar) Programmable
Test Mode	Controlled by PC	Wintestem
Connectivity	Interface	RS-232
Mechanical	Dimensions	355x100x240 (WxHxD)

Interested in more information?