Wireless Clip Systems
Wireless Clip Systems
Overview
The Wireless Clip testing module detects the presence/ absence of the clips by emitting the status to a central receiver without the need of a wired connecting network between the sensors and the main controller.
Wireless switch. More compact and ready to be assembled in 3 orientations
Aluminum support allows to adjust the height of the clip
Adjustable base horizontally +-5mm Folding 90º
Center of the clip always aligned with the board fixation to assure an easy and precise lay out
This solution applies wireless technology to the Inline clip testing.
There is no need to connect the panels installed in the conveyor at any point of the assembly line to make the test and this allows for greater flexibility.
This system can support up to 30 meters between a testing point and receiver. There are 5 different adapters to support all types of clips that can be mounted in 3 different orientations.
This solution applies wireless technology to the Inline clip testing.
There is no need to connect the panels installed in the conveyor at any point of the assembly line to make the test and this allows for greater flexibility.
This system can support up to 30 meters between a testing point and receiver. There are 5 different adapters to support all types of clips that can be mounted in 3 different orientations.
Main features
-
More Flexibility
-
No wiring needed
-
No controller neither any additional hardware to be installed on the line panels
-
Each switch transmits a signal when pressed and another when released
-
Switch emitters are specially designed by EMDEP in order to adapt to all clip testing modules needs.
__________
Testing
Powerful monitoring system:
-
Integrated in Wintestem or Standalone
-
KSK Production
-
Subassembly clips testing
-
Communication with PLC
-
Option to Mix with hardwired counterparts
-
Full Customizable solution
Software
Boards
Clips definition
Visual aid
Layout image
Clips position
Layout image
Groups
Sections
Test Mode
All OK
Once OK
Group once OK
References
Which clips will be assembled in each reference?
-
Show the harness layout as a visual aid to improve the clips test
-
The software has the option to split the harness layout into different sections and show each part for a better clips ubication.
-
In each section it is defined the components to test.
-
Multiscreen Support to facilitate the test
-
It is possible to select different monitors for each section defined in the layout
-
Operator is focused in his branch